Custom Spark Plug Boxes & Spark Plug Packaging
Spark plugs are small, heavy for their size, and the ceramic insulator chips if you look at it wrong. That combination makes the carton do real work rather than just carry branding. We run a decent volume of spark plug packaging at ZEE Packaging and the brief is nearly always the same, protect the porcelain and get the part number readable from three feet away.
Part Number Comes Before Branding
In an auto parts aisle nobody is admiring your logo. They are matching a number.
- Part number printed large on the front of the spark plug box
- Repeat it on both end flaps, because these sit stacked in bins
- Gap setting stated plainly on the panel
- Thread size, reach and hex on the side
- Barcode with proper quiet zone
- Cross reference to OE number if you have it
Retailers come back to us often asking to enlarge the number after their first run. Worth sizing it properly at proof stage.
- Single plug tuck end carton the everyday spark plug box, tight and slim
- Four pack carton most common for a full set, needs a divider
- Six and eight pack heavier, we move you up in board weight
- Corrugated shipper bulk spark plug packaging for trade and warehouse
- Blister backer card hanging retail spark plug packaging with peg hole
- Ecommerce mailer direct to door with cushioning inside
Sizes We Print Regular
Every spark plug box gets built to your product, though these repeat constantly:
- 1" x 1" x 3.5" for a single standard plug
- 1.25" x 1.25" x 4" for longer reach plugs
- 4" x 2" x 3.5" for a four pack spark plug box
- 5.5" x 2.5" x 3.5" for a six pack
- 7" x 3" x 3.5" for an eight pack
- 8" x 6" x 4" for a bulk corrugated carton
Send us the plug length including terminal nut and the hex width and we build the dieline off that.
Protecting The Ceramic
This is the part that actually matters in spark plug packaging.
- Die cut paperboard divider so plugs never touch plugs
- Individual cells in a multipack spark plug box, not a loose cavity
- Snug internal fit so nothing rattles during freight
- Corrugated inner for bulk cartons
- Avoid oversizing, movement is what cracks insulators
Board Choice
- Cardstock 18pt to 24pt for single plug spark plug boxes
- 24pt and above for four packs and larger
- Corrugated E flute for multipacks and shippers
- SBS C1S for clean printed retail spark plug packaging
- Kraft board for trade and OE supply lines
Plugs are dense. A 12pt or 14pt carton splits at the corner once you load four of them in, so we do not recommend it.
Print And Finish
- Offset or digital, CMYK plus spot Pantone for brand color
- Gloss lamination, standard on automotive spark plug packaging
- Matte film if you want a more premium performance look
- Spot UV over the logo or performance badge
- Foil stamping on premium and racing ranges
- Metallic ink for a technical feel
Greener Options
- Recycled kraft spark plug box with no film
- FSC certified board, certificate on request
- Soy based ink
- Paperboard divider instead of plastic tray
- Right sized spark plug packaging so you ship less air
How We Work
- 100 unit minimum on any spark plug box design
- Free 3D mockup and flat proof
- Free dieline from our inhouse team
- 5 to 8 business day urgent turnaround
- Free shipping worldwide
Frequently Asked Questions
How do we stop the insulator cracking in transit?
Dividers and a snug fit. Every plug should sit in its own cell so ceramic never contacts ceramic, and the box should not be oversized.
Do you supply the divider or do we?
We make it. The divider is die cut from the same job so it drops straight into the spark plug box with no assembly headache.
Can you print part numbers on the end flaps?
Yes and we recommend it. Boxes get stored upright in bins, so the end flap is what the counter staff actually see.
What's the price on a box of spark plugs?
Rough estimates are $0.18 to $0.55 per unit for a single plug carton, $0.45 to $1.20 for a four pack with divider and $1.10 to $2.60 for corrugated bulk cartons at moderate quantity. Foil and lamination add to that. Shipping is included in our price. This is estimate only, so ask our team for an exact quote.
Which board for an eight pack?
24pt minimum, or corrugated E flute if you want more margin for error. Eight plugs carry real weight.
Can you match our existing brand color?
Give us the Pantone code and our press team matches it. Without a code we work from a physical sample you send.
Do you do blister backer cards?
We do. Printed cards with peg holes, and we can supply the card alone if your blister is sealed elsewhere.