Custom Auto Light Boxes & Auto Light Packaging
Automotive lighting is a fitment category. Nobody buys a headlight bulb because the box looks nice, they buy it because they are confident it fits their car. So auto light packaging has two jobs, protect a fragile glass or LED assembly, and make the part number impossible to get wrong. We print a lot of this at ZEE Packaging and those two things drive every decision.
Fitment Data Comes First
Every auto light box we design starts with the panel layout, not the artwork.
- Bulb type or part number large on the front, H11, 9005, H7, whatever your range uses
- Vehicle fitment note or a QR code to a lookup tool
- Lumen output, color temperature in Kelvin and wattage
- Voltage and beam pattern where relevant
- DOT or SAE compliance mark if your product carries it
- Barcode with proper quiet zone
Getting this wrong costs you returns, so we always proof the data panel carefully before press.
- Tuck end folding carton the everyday retail auto light box for single bulb
- Seal end carton glued, tidier on a peg or shelf
- Twin pack carton with divider, most bulbs sell in pairs
- Corrugated shipper for full headlight assembly auto light packaging
- Window carton so the buyer sees the actual bulb
- Clamshell replacement carton for brands moving away from plastic
- Ecommerce mailer for direct to door auto light packaging
Sizes We Run Regular
Each auto light box is built to your product, but these come up over and over:
- 2" x 2" x 4" for a single halogen bulb
- 4" x 2" x 5" for a twin pack auto light box
- 6" x 4" x 3" for LED conversion kit with driver
- 8" x 6" x 4" for fog light and small assembly
- 14" x 10" x 8" for a full headlight housing
- 5" x 3" x 2" for LED strip and interior auto light packaging
Send the product dimensions including any pigtail, connector or ballast and we build the dieline around all of it.
Board And Protection
Glass filament and LED lenses both break, so this part matters.
- Corrugated E flute for single bulb auto light box
- B flute for assembly and heavier auto light packaging
- SBS C1S for printed retail carton
- Kraft corrugated for trade and workshop supply
- Cardstock 18pt to 24pt only on small bulb cartons
Inside we add die cut paperboard cradle or a foam bed. A bulb rattling loose inside a carton arrives broken more often than people realize.
Print And Finish
- Offset or litho lamination on corrugated
- CMYK plus spot Pantone so your brand blue stays consistent
- Matte or gloss film, matte hides scuff better
- Spot UV over the logo or lumen badge
- Foil stamping on premium LED range
- Window patch with clear PET film
- Install steps on the back panel
- Warning about touching halogen glass with bare fingers
- Warranty period and contact details
- QR code to fitting video
- Cross reference to OEM part number
Greener Choices
- Recycled corrugated auto light box
- FSC certified board with certificate
- Soy based ink
- Paperboard cradle replacing plastic clamshell
- Right sized auto light packaging so you ship less air
How We Work
- 100 unit minimum on any auto light box design
- Free 3D mockup and flat proof
- Free dieline from our own designer
- 5 to 8 business day urgent turnaround
- Free shipping worldwide
Frequently Asked Questions
Can you replace our plastic clamshell?
Yes, this is a common request now. A paperboard carton with a die cut cradle does the same job and recycles far easier.
How do we stop a bulb breaking in transit?
A snug die cut cradle. It holds the base and keeps pressure off the glass, and it costs very little compared to a return.
Do you print part numbers and fitment data?
We print whatever you supply. Send the final data sheet and our team lays it out on the panel, then you approve it on proof.
What’s the price of an auto light box?
Rough estimate is $0.30 to $0.85 per unit for small folding cartons, $0.90 to $2.20 for twin packs with insert and $1.80 to $4.50 for corrugated assembly boxes at moderate quantity. Window patch and foil add to that. Shipping is included in our price. This is estimate only, so ask our team for a exact quote.
Twin pack, do you supply the divider?
Yes. We build a paperboard divider so both bulbs sit separate and never touch each other.
Can you add a window?
Yes with clear PET patch, or a plain die cut opening if you want to skip film entirely.
Which flute for a full headlight assembly?
B flute minimum, and we usually add corner protection. Those units are heavy and E flute alone doesn’t hold up.