Custom Bearings Boxes & Bearings Packaging
Bearings are heavy for their size, they are oiled, and the part number matters more than anything printed on the front. That combination makes bearings packaging its own little discipline. A pretty box that tears at the corner or hides the designation is no use to a distributor or a workshop. We print a fair amount of this at ZEE Packaging so here is what actually counts.
Weight Is The First Problem
A 6205 bearing weighs a few ounces. A tapered roller for a truck hub weighs a lot more. The bearings box has to be specified for the heaviest item in the range, not the lightest.
- Corrugated E flute for small deep groove ball bearings
- B flute once you go past half a pound
- Double wall for large tapered and spherical roller bearings packaging
- Reinforced base panel or a glued liner on heavier bearings boxes
- Avoid thin cardstock entirely on anything with real mass
Thin board splits at the base seam and the part drops through. We have seen it plenty of times on boxes made elsewhere.
Oil And Grease Considerations
Bearings arrive coated in preservative oil and that will soak into plain board.
- Grease resistant liner or a poly bag inside the bearings box
- Wax coated inner sleeve for long term storage bearings packaging
- VCI paper wrap for corrosion protection
- Avoid uncoated kraft in direct contact with an oiled part
- Sealed inner pouch then the printed carton outside
The Part Number Rules Everything
Nobody buys a bearing on branding. They buy on designation, so the bearings packaging has to make that obvious.
- Full designation printed large on the front and one end panel
- End panel print matters because stock sits stacked on shelf
- Bore, outer diameter and width listed clearly
- Seal or shield suffix, ZZ, 2RS, and so on
- Barcode with proper quiet zone
- Batch and country of origin area
Print the designation on both ends of the bearings box. Warehouse staff pull from either direction and it saves real time.
- Tuck end folding carton the standard single bearings box
- Seal end carton glued, tidier for retail and bin display
- Corrugated shipper multipack and trade bearings packaging
- Two piece lid and base for large industrial bearings
- Partitioned tray several units in one bearings box
- Mailer direct to workshop ecommerce orders
Sizes We Run Regular
Every bearings box is made to your part, but these come up often:
- 2" x 2" x 1" for 608 and skate size
- 2.5" x 2.5" x 1" for 6202 and 6203
- 3" x 3" x 1.25" for 6205 and 6206
- 4" x 4" x 1.5" for larger deep groove
- 6" x 6" x 2.5" for tapered roller
- 8" x 8" x 3" for industrial and multipack bearings packaging
Send us the outer diameter and width plus any inner wrap you use and we build the dieline around it.
Print And Finish
- Flexo or litho lamination on corrugated bearings boxes
- CMYK plus spot Pantone for brand consistency
- Matte lamination, it resists oil marks better than gloss
- Uncoated kraft for a trade look
- Spot UV on the logo if you want a retail feel
Greener Options
- Recycled corrugated bearings boxes
- FSC certified board, certificate on request
- Soy based ink
- Paperboard partition instead of plastic tray
- Right sized bearings packaging so you ship less air
How We Work
- 100 unit minimum on any bearings box design
- Free 3D mockup and flat proof
- Free dieline from our own team
- 5 to 8 business day urgent turnaround
- Free shipping worldwide
Frequently Asked Questions
Will oil soak through the carton?
It will on plain board. A grease resistant liner or an inner poly bag stops it, and that is what we normally spec.
Which flute for a heavier tapered roller?
B flute minimum, double wall once you go past a couple pounds. E flute is only really safe on small ball bearings.
Can you print the designation on both ends?
Yes and we always suggest it. Stock gets pulled from either side of a shelf so both end panels need the number.
Do you make partitioned boxes for multipack?
We do. Paperboard dividers keep each unit separate so nothing knocks against the next one in transit.
Can you supply VCI paper as well?
We can advise on it and quote it alongside your bearings packaging, though the wrap itself is a separate supply item.
Is matte or gloss better here?
Matte, generally. It hides handling marks and oil transfer far better than a gloss film.
What is the current pricing for a bearings box?
Rough estimate is $0.20 to $0.60 per unit for small cardstock cartons, $0.55 to $1.50 for corrugated singles and $1.40 to $3.20 for partitioned multipacks at moderate quantity. Board grade swings it most. Shipping is included in our price. This is estimate only, so ask our team for a exact quote.