Custom Automotive Parts Boxes & Automotive Parts Packaging
Auto parts are heavy, oily, sharp edged and sold on part number rather than looks. That combination makes automotive parts packaging harder than most categories we print. A brake rotor and a sensor need completely different boxes, and the same brand often sells both. We handle a good volume of this at ZEE Packaging so here is what actually matters.
Weight Decides The Box
Before anything else we ask what the part weighs and whether it has sharp edges.
- Under 1 lb, a folding carton automotive parts box works fine
- 1 to 5 lb, we move to E flute corrugated
- 5 to 20 lb, B flute or double wall automotive parts packaging
- Over 20 lb, double wall with internal reinforcement
- Anything with sharp edges gets a liner or wrap regardless of weight
Most complaints we hear about old suppliers come down to board weight. A carton that holds on the shelf still bursts when a courier drops it.
- Tuck end folding carton small parts, sensors, bulbs, clips, cheapest automotive parts box
- Seal end carton glued, tidier for shelf facing
- Auto lock bottom fast to pack, good for heavier items
- Corrugated shipper the workhorse of automotive parts packaging
- Double wall carton rotors, calipers, pumps and anything with real weight
- Tray and sleeve used for kits and multipiece automotive parts boxes
Sizes We Run Often
Every automotive parts box is built to your part, but these come up a lot:
- 4" x 3" x 2" for sensors, relays and small electricals
- 8" x 6" x 3" for filters, pad sets and belts
- 12" x 12" x 3" for brake rotors
- 14" x 10" x 6" for pumps, alternators and starters
- 18" x 12" x 8" for larger assemblies
- 6" x 4" x 4" for spark plugs and injector sets
Send the part dimensions plus weight and we build the dieline around it.
Board Selection
- Cardstock 18pt to 24pt for light retail automotive parts boxes
- E flute corrugated for mid weight parts
- B flute and C flute for heavier automotive parts packaging
- Double wall BC flute for rotors and cast components
- Kraft corrugated for trade and warehouse supply
- SBS C1S when you want a clean printed retail face
Protecting The Part Inside
- Die cut corrugated insert so nothing shifts in transit
- Divider for multipiece kits
- Grease resistant liner for oily components
- Edge protector on anything sharp
- VCI paper option for bare metal that rusts
What Has To Be On The Panel
Automotive buyers scan for numbers, not for design.
- OEM and aftermarket part numbers, large and on multiple panels
- Vehicle fitment or application range
- Barcode with proper quiet zone
- Country of origin and warranty note
- Quantity in pack
- Handling icons for heavy or fragile items
Our prepress team checks every one of these against the dieline before we print, so nothing gets trimmed.
Print And Finish
- Flexo on corrugated, offset litho lamination when you want photo quality
- CMYK plus spot Pantone for brand consistency
- Matte lamination on retail automotive parts packaging, it hides scuff better
- Spot UV or foil on premium performance ranges
- Plain kraft print for trade supply
Greener Options
- Recycled corrugated automotive parts boxes
- FSC certified board, certificate on request
- Soy based inks
- Unlaminated versions for curbside recycling
- Right sized automotive parts packaging so you cut freight
How We Work
- 100 unit minimum on any automotive parts box design
- Free 3D mockup and flat proof
- Free dieline from our own designer
- 5 to 8 business day urgent turnaround
- Free shipping worldwide
Frequently Asked Questions
Which flute for a brake rotor?
Double wall BC, no question. A rotor concentrates all its weight on a small footprint and single wall gives out under stacking.
Can you print part numbers on every panel?
Yes and we recommend it. Warehouse pickers read whichever face is showing, so repeating the number saves a lot of handling time.
How much is a car parts box?
Rough estimate is $0.35 to $0.95 per unit for folding cartons, $0.80 to $2.20 for E flute corrugated and $1.80 to $4.50 for double wall at moderate quantities. Inserts and print coverage move it. Shipping is included in our price. This is estimate only, so ask our team for a exact quote.
Do you supply inserts for a kit?
We do. Die cut corrugated dividers hold each piece separate so nothing rattles or scratches during shipping.
How do you handle oily or greased parts?
A grease resistant liner inside the automotive parts box. Without it the oil wicks into the board and ruins the print.
Will bare metal rust inside the carton?
It can in humid transit. We offer VCI paper and desiccant options for automotive parts packaging shipping bare steel.
Can you match our existing box exactly?
Send us a sample. Our team measures it, rebuilds the dieline and matches the board and color.